What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 30.06.2025 03:31
so, what happens?
What does a fuse do?
Upvotes:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Josh Allen And Hailee Steinfeld's Wedding Photos Have Social Media Buzzing - OutKick
what exactly is a ‘surge’ protector?
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
First Sentence:
This is 'the assistant's answer'
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
That ‘unsubscribe’ link is actually a hidden security risk — do this instead - Tom's Guide
This one hit behind the barn.
At one ohm, the resistor has a maximum of 1 watt power.
But… the neutral is now “floating” because of the 1 ohm resistance.
Popular chicken chain shares, massive expansion plan - TheStreet
An AC voltage/ current source, and an ac inductive load.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Common Antibiotic Found To Tame Blood Pressure in Surprising New Role - SciTechDaily
Barnstars:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At least they know the answer if they wanted it.
Harvard scientists issue 'toxic' warning over 'hidden dangers' of protein powders - LADbible
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Because the load is inductive, the current lags the voltage.(by a bit).
but I think this circuit , shows a few more pieces.
Halo: Edge of Dawn | Cover Reveal | Halo - Official Site (en) - Halo Waypoint
a photo is worth a thousand words.
This device then solves the entire problem.
A circuit breaker is similar, but is resettable.
Man thought he was 'tired from work' before brain tumour diagnosis - BBC
It seems Mohan does not understand the difference between a comment and an Answer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes the function of a fuse.
Microsoft belatedly attempts to tame USB-C confusion with its rules for PC OEMs - Ars Technica
In schematic diagrams this is the symbol for a fuse:
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Mets To Sign Richard Lovelady - MLB Trade Rumors
2024–10–16 [ OO OLAOYE OYEBODE ]
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Edit 2024–10.
He then describes Rainy Season and Lightning.
[old diagram got deleted by accident]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Here is a simplified AC power diagram.
(Dc diagram shown, AC is similar).
the problem then depends on "how fast does the fuse operate?".
One is “what exactly is in a ‘surge protector’ ? ”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The bolt then partially travels down the line to your home.
There are two important concepts here.
The other is “what does a “fuse” do?”
Now when you have a certain ac resistance, then a current flows in a loop.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is lightning?
2024–10–10[John johnson John Johnson ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
One
There are three different concepts here that are getting confused.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The third is lightning and “how it gets conducted into a home.”
A fuse is a non-resetable over current circuit protector.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
For this case there are devices called Metal oxide varistors (MOV).
It also is a device that limits the change in current flow.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
[image of Common-mode choke]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
but this device (an Inductor) … impedes the rapid changes in the current.
But it can get overloaded, and no longer works.
eight
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is where the MOV conducts again, and dissipated the energy.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
He then asserts :
nine
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
I post the exact comment here.